Skip to content
TestLuma

Controllers

PS5 DualSense Controller Test

Connect your DualSense by USB-C or Bluetooth and press any button. The diagram follows the PlayStation layout, with Create, Options and the touchpad click.

Browsers only see a controller after you press a button on it, so the page stays empty until you do. That's a privacy rule built into the browser, not a fault. Chrome and Edge usually map the DualSense to the standard layout, so the diagram lines up button for button. Other browsers may show it as a generic gamepad with different button numbers.

Two parts of a DualSense wear out most: the analog sticks and the trigger mechanisms. The stick sensors are potentiometers, which slowly lose accuracy as they wear, and that is what causes drift. Testing at rest shows drift, and slowly rolling each stick around its edge shows dead zones and flat spots. Repeat the test over USB-C and Bluetooth. If a problem only shows up wirelessly, it's a connection issue rather than worn hardware.

Connect a controller by cable or Bluetooth, then press any button on it. Browsers only reveal a controller after a button press.

What to test first

Common issues

Stick drift

The most common DualSense complaint. Measure resting drift above; under 0.05 is normal.

Not connecting to a PC

Charge-only cables and pairing mode are the usual culprits. Hold Create and PS together to pair over Bluetooth.

Triggers not reaching 100%

Press each trigger fully and watch the percentage. A trigger stuck below about 95% may be blocked by debris.

Tips

  • Adaptive trigger effects and the speaker need game support and aren't testable in a browser.
  • Firmware updates come through a PS5 console or Sony's PC updater.

Questions

Why doesn't my DualSense show up in the test?

Press any button after connecting. Browsers hide controllers until they receive input. If it still doesn't appear, try a different USB-C cable, since many cables only carry power and no data.

How much stick drift is too much?

A resting value under about 0.05 is normal and games ignore it with a small dead zone. Values that stay higher, or that creep upward over a few seconds, usually mean the stick sensor is worn.

TestLuma is an independent site. Brand and product names belong to their owners and are used only to identify devices.